Skip to content
5 Top-rated roofing contractors in Florida specializing in full tear-off

5 Top-rated roofing contractors in Florida specializing in full tear-off

Florida roofs take a beating. Between hurricane-season wind loads, constant UV exposure, and heavy seasonal rain, a roof that's limping along on repairs eventually hits a point where a complete tear-off is the only responsible path forward. Finding top-rated roofing contractors in Florida specializing in full tear-off is harder than it sounds. The state has thousands of licensed roofers, and not all of them have the experience or crew capacity to handle a full system removal and reinstall cleanly.

This list covers five contractors worth serious consideration, with notes on what each one actually brings to the table.

Finding the Right Contractor for a Full Roof Tear-off in Florida

A full tear-off is far more disruptive and technically involved than a simple overlay re-roof. The crew strips everything down to the deck, checks the sheathing for damage, replaces what's compromised, and rebuilds the entire system from underlayment up. Florida's building code - especially post-Hurricane fastening-pattern and wind-rated material requirements - means sloppy work isn't just dangerous; it's potentially non-compliant.

That raises the stakes on contractor selection. Licensing, insurance, and actual hurricane-country experience matter more here than in most other states.

What to Look for in a Tear-off Specialist

Florida Statute 489 requires roofing contractors to carry a state-issued Certified Roofing Contractor (CRC) or Registered Roofing Contractor license. Before you sign anything, check that the license number is active through the Florida DBPR lookup tool. An unlicensed crew doing a tear-off leaves you with no warranty protection and potential code-violation liability on your shoulders.

Beyond the license, look for contractors who carry both general liability and workers' compensation insurance, offer a written workmanship warranty that's separate from the manufacturer's material warranty, and can pull permits without pushing that task back to you. Ask directly: do they subcontract the tear-off labor, or does their own crew handle it? That answer says a lot about how much quality control they actually exercise.

1. Florida Roofing and Renovations Inc

A Palm Bay-based contractor with more than 40 years of continuous operation in Brevard County, Florida Roofing and Renovations Inc brings documented longevity and dual state certifications to every full tear-off project.

  • Licenses: State Certified Roof Contractor (#CCC1331836) and State Certified General Contractor (#CGC15227853)

  • Service area: All of Brevard County, including Palm Bay, Melbourne, Viera, Rockledge, Cape Canaveral, Cocoa Beach, Satellite Beach, and surrounding beach communities

  • Roof systems: Shingle, tile, metal, and flat roofs for residential; metal, flat, TPO, and roof coatings for commercial

  • Extras: Free estimates, financing available, credit cards accepted; also handles soffit, fascia, siding, and exterior renovation work. The company has completed over 1,000 roofs and renovations in Brevard County, holds a 4.6-star Google rating across 32 reviews, and customer feedback highlights on-schedule project completion and complex structural work including architect-involved rebuilds.

The dual general contractor certification matters. It means the company can legally handle structural deck repairs during a tear-off without subcontracting that work out, which keeps the project under one roof and simplifies accountability.

2. Brehm Roofing

A Gainesville-based contractor covering North Central Florida, Brehm Roofing holds dual Florida contractor licenses and an Owens Corning Platinum Preferred designation that unlocks extended manufacturer warranties.

  • Licenses: CCC1336098 (Certified Roofing Contractor) and CRC1334991 (Certified General Contractor); A rating from the Better Business Bureau

  • Service area: North Central Florida, including Alachua County and surrounding counties like Lake City, Ocala, The Villages, Live Oak, and Williston

  • Roof systems: Asphalt shingles, metal, standing seam metal, stone-coated steel, tile, and flat roofing (TPO and modified bitumen)

  • Extras: 24/7 emergency service, storm damage restoration, roof tarping, and roof coating; verified through Directorii, a third-party contractor vetting platform. Brehm Roofing's Owens Corning Platinum Preferred status allows it to offer manufacturer-backed extended warranty coverage that most contractors cannot.

The Owens Corning Platinum Preferred status is a real differentiator for homeowners who want manufacturer-backed extended warranty coverage on a tear-off project. Most contractors can only offer the standard warranty.

3. Bruckner Roofing

Serving Palm Bay and Brevard County for over 20 years, Bruckner Roofing focuses on hurricane-rated systems and has published transparent pricing for residential and commercial tear-off work.

  • Licenses: Florida Licensed Roofing Contractor; fully bonded and insured

  • Service area: Palm Bay and Brevard County

  • Roof systems: Shingle, metal, TPO, modified bitumen, and flat roofing; gutters and drainage

  • Extras: Free estimates, financing available, 24/7 storm response and tarping; 5-year workmanship warranty. Published pricing as of 2026: minor repairs $450 to $1,500; shingle replacement (average home) $9,000 to $14,000; metal roof installation $14,000 to $24,000; commercial flat roofing $6 to $9 per sq ft.

The one limitation worth noting: published service area appears to center on Brevard County, so homeowners farther afield should confirm coverage before scheduling an estimate.

4. Evans Roof

Operating since 1986 and holding offices across six Florida regions, Evans Roof is one of the more geographically broad contractors on this list, with OSHA-certified safety professionals and multilingual customer service.

  • Licenses: Licensed and insured certified general contractor; OSHA-certified safety staff

  • Service area: Offices in Longwood (Orlando), Tampa, Cape Coral, Bradenton, Boynton Beach, and the Broward/Miami area

  • Roof systems: Metal, tile, shingle, asphalt, flat, single-ply, and waterproofing; tile brands include Brava, Ludowici, and Velux

  • Extras: Written warranty on all jobs; free estimates; locally owned. Evans Roof has been in operation since 1986 (40+ years), serves residential custom homes, commercial restaurants, HOA/condos, and historical buildings, and offers customer service in English, Spanish, French, and Portuguese.

The historical building experience is something most roofing contractors don't advertise. For homeowners with older homes that need custom or period-appropriate materials on a tear-off, Evans Roof is worth a call.

5. H&H Legacy Roofing

An Orlando-based contractor with over 25 years of experience, H&H Legacy Roofing handles residential and commercial tear-offs with a focus on storm damage work and flat-rate pricing.

  • Licenses: Published details on specific license numbers were not available through publicly accessible sources at time of writing

  • Service area: Based in Orlando, Florida; geographic service radius was not available through publicly accessible sources at time of writing

  • Roof systems: Roof repairs, replacements, inspections, and storm damage work (residential and commercial)

  • Extras: Eco-friendly practices, flat-rate pricing, free in-home estimates, on-time guarantee, full warranty, and guaranteed repairs; customer service available in English and Spanish

  • Considerations: Specific license numbers, geographic service radius, and pricing tiers were not available through publicly accessible sources at time of writing. The flat-rate pricing model is worth asking about directly during an estimate, as it cuts out the ambiguity that often comes with time-and-materials tear-off quotes.

Tear-off Costs and What Affects the Price

Pricing figures below are drawn from contractor-published rates and Brevard County market data current as of October 2026. Costs vary by roof size, pitch, material, and deck condition discovered after tear-off.

Cost Factor

Typical Florida Range

Notes

Shingle tear-off + replacement (residential avg.)

$9,000 to $14,000

Bruckner Roofing published range

Metal roof installation (residential)

$14,000 to $24,000

Bruckner Roofing published range

Commercial flat roofing

$6 to $9 per sq ft

Bruckner Roofing published range

Minor repairs (no full tear-off)

$450 to $1,500

Bruckner Roofing published range

Deck sheathing replacement (per sheet)

Not published by listed contractors

Common add-on discovered at tear-off

Permit fees (Brevard County)

Varies by project valuation

Homeowner or contractor can pull

Extended manufacturer warranty (Owens Corning Platinum)

Available through Brehm Roofing

Requires Platinum Preferred contractor

Workmanship warranty

5 years (Bruckner); others vary

Confirm in writing before signing

The biggest pricing variable in any tear-off project is usually the deck. Contractors can't assess how much sheathing needs replacing until the old system's off. Getting a written per-sheet cost for deck repairs before work starts is the best way to avoid billing surprises mid-job.

Bottom Line

Top-rated Florida roofing contractors who specialize in full tear-offs aren't hard to find. Matching the right one to your region, roof type, and desired warranty protection, that's the harder part. Contractors holding both roofing and general contractor licenses can handle structural deck issues in-house; those with manufacturer Preferred status can offer extended material warranties most crews simply can't. Get deck repair pricing upfront, confirm the license on DBPR's public lookup, and have the workmanship warranty in writing before anyone starts.

Previous article How to Choose a Reliable Roofing Contractor in Huntington NY for Your Home
Next article Custom Metalwork vs. Prefab: Which Is Worth Your Money?